Mould Testing Unit
WHY MOULD TESTING UNIT?
» The air nozzles located above the unit allow a smooth (sensitive) movement of the moving plates and thus the mould opening/closing and moving (stripper) plate function tests can be conducted.
» The hydraulic pistons on the mould can be tested with the help of hydraulic pumps assembled on the unit.
» Movement of the ejector plate by the help of the hydraulic system specially designed for unit enables to test the ejector pins and the accessories on the ejector (flexible core) plate.
» Water leakages on water lines can be detected by the help of a manometer valve installed on the unit. The pressure drop on the manometer valve will allow you to detect the leakage on the water lines.
» The unit enables detection and the elimination of most mould manufacturing defects before mould assembly on the injection machine and allows a defect-free and trouble-free delivery to your customers.
» With the advantage of reduced (eased) mould assembly time, and by resolving the injection pressure or mould repair related problems in advance, the unit helps to reduce cost in your business and save your time.
» As the unit is easy to use, it provides a practical working environment for everyone.
SECURITY AND SAFETY
» The unit provides a safe working environment for your staff.
» Ejector plate and flexible core tests are usually conducted by primitive methods at the workshops. Therefore the moulds may be damaged during those tests or personal injuries may occur. Companies owning such a mould test unit does not suffer from those problems. Labor accidents and possible damages on the moulds are avoided.
» You can prevent bad and uncontrolled workmanship, save money and time.
» Due to its small dimensions, it occupies small space in your workshop.
» It allows to move and control both (ejector and stationary nozzle) plates limitless and effortless with the help of air control.
» The product is available in 3 different models. This allows to move the mould plates up to 3000 kg/5000 kg. Rigid chassis structure is designed by calculating the weights.
» The water line tests are controlled practically by using the pressure gauge on the unit. As no water is used for test, the risk of corrosion has been avoided.
» The unit enables analysis of most mould manufacturing defects in advance, before mould assembly on the injection machine.
Kalıp Test Ünitesi